Grill & Oven Element Measurement Guide
Even though grill and oven element shapes can vary, all measurements are based on the following:

Width - refers to the lateral width of the element from outside edge to outside edge.

Height - refers to the height of the element from the outside edge of the bracket to the opposite outside edge of the element. If there is no bracket fitted, height is from the base of the tags to the outside edge of the element

Tags - refers to the distance between the centre of the electrical tags of the element. if two measurements are given Tag 1 refers to the external tags and Tag 2 refers to the internal tags.

Bracket - refers to width of the fixing bracket.

Please allow +/- 5mm on all width and height measurements